Scrap plastic pyrolysis to oil machine product introduction
Scrap plastic pyrolysis to oil machine can pyrolysis down of waste plastic to energy. Scrap plastic pyrolysis to oil machine is an industry conducted pyrolysis . In the Scrap plastic pyrolysis to oil machine , the long- chain polymers break down into smaller chains of hydrocarbon gases and pyrolysis oils. Heat required for the catalytic reaction .
Scrap plastic pyrolysis to oil machine
Every year a large amount of plastic waste is discarded in the Earth. These plastic to with stand the natural process of decomposition of all. According to statistical analysis , Waste plastic generated more than 250 million tons each year. A lot of these plastic garbage is used to fill the land , which in turn may result in a waste land to create a major threat to the environment in the future. People use and dump waste tyres almost every day.
The right way to disposal waste plastic and tyre
In pyrolysis as a process, the polymer waste is not burned, instead it is broken down into usable finished products like Pyrolysis Oil, Hydrocarbon Gas and carbon. In case of plastic / tyre waste management, pyrolysis is better alternative compared to incineration or dumping. Incineration is burning of waste which leads to loss of valuable energy from polymer waste. Dumping of polymer waste is known to cause land pollution. By pyrolysis of polymer waste, it is possible to recover value from waste in the form of Pyrolysis oil, Hydrocarbon gas and charcoal.
Waste plastic Solution: Scrap plastic pyrolysis to oil machine:
Usage: Waste plastic Recycling to Fuel Oil
Input: Different plastic type, (PP,PE,PS,ABS) etc.
Output: 20%-95% fuel oil, 30%-35% carbon black , 5%-8% gas.
Heating material: coal/wood/fuel oil/natural gas
Machine cover area: usually 400 square meters.
Reactor material: Q245R Boiler plate.
What is fuel oil application?
Fuel oil can be used as heating material to heavy industries, like cement factory, brick factory, glass making factory, boiler etc.
Fuel oil application
Technical parameter of scrap plastic pyrolysis to oil machine | ||||
---|---|---|---|---|
Items | Contents | |||
1 | Equipment type | DY-1-6 | DY-1-8 | DY-1-10 |
2 | Raw material | scrap plastic, waste tyre, waste rubber, | ||
3 | Structural form | Horizontal rotation | Horizontal rotation | Horizontal rotation |
4 | 24-hour Capacity | 6 ton | 8 ton | 10 ton |
5 | Oil yield | 2.7-3.3ton | 3.6 -4.4ton | 4.5 -5.5ton |
6 | Operating pressure | Normal | Normal | Normal |
7 | Material of pyrolysis Reactor | Q245R | Q245R | Q245R |
8 | Thickness of pyrolysis Reactor | 16mm | 16mm | 16mm |
9 | Rotate speed of pyrolysis Reactor | 0.4turn/minute | 0.4turn/minute | 0.4turn/minute |
10 | Total power | 19KW | 19KW | 19KW |
11 | Mode of cooling | Water cooling | Water cooling | Water cooling |
12 | Cooling area of condenser | 100sqm | 100sqm | 100sqm |
13 | Kind of transmission | Internal gear drive | Internal gear drive | Internal gear drive |
14 | Noise dB(A) | ≤85 | ≤85 | ≤85 |
15 | Size of Reactor(D×L) | 2200×6000 | 2200×6600 | 2600×6600 |
16 | Working form | Intermittent operation | Intermittent operation | Intermittent operation |
17 | Delivery time | 20days | 20days | 20days |
18 | Weight | 27T | 30T | 35T |