Scrap plastic recycling pyrolysis plant product introduction
The scrap plastic recycling pyrolysis plant can convert the scrap plastic to fuel oil. The plant made by Henan doing mechanical equipment co.ltd has a higher oil yield rate and will generate no air commission to the environment.
The oil yield rate is one of the most indexes of the pyrolysis plant. For our scrap plastic recycling pyrolysis plant we have a higher oil yield rate for the enlarged cooling area and the special designed condenser. When the reactor is sealed well, the oil yield of scrap plastic recycling pyrolysis plant is higher. When we enlarge the cooling area the oil yield rate of the pyrolysis plant will also be improved.
About the safety we have special designed safety equipment to make sure the plant is safe. The vacuum system will make sure the pyrolysis plant function under the negative pressure to prevent the oil leaking to cause accident. The safety oil gas gun will recycle the oil gas safety to avoid accident. The auto-welding technology will prevent the oil gas from leaking to cause accident. The professional thermometer, pressure gauge, and safety valve will measure the temperature, pressure; once the pressure or temperature is abnormal the alarm device will raise the alarm.
Scrap plastic recycling pyrolysis plant is energy saving. It will convert scrap plastic to fuel oil with little external energy. The natural gas or coal is only used when the plant starts. Once the plant is running it will not need external energy. So the scrap tyre pyrolysis plant is energy saving. The water used to cool the oil gas is non-contact with the process. The water is clean. The well sealing reactor will improve the efficiency of plastic pyrolysis.
To the environment, scrap tyre pyrolysis plant is environmental friendly. The plant will generate no waste emission to the environment. Well dedusting system will remove the dust of discharged gas. We have automatic carbon black discharging system to discharge the carbon black. The oil gas which cannot be condensed will be recycled to heat the reactor.
|Technical parameter of scrap plastic recycling pyrolysis plant|
|2||Raw material||Scrap plastic, waste tyre, waste rubber,|
|3||Structural form||Horizontal rotation||Horizontal rotation||Horizontal rotation|
|4||24-hour Capacity||6 ton||8 ton||10 ton|
|5||Oil yield||2.7-3.3ton||3.6 -4.4ton||4.5 -5.5ton|
|7||Material of pyrolysis Reactor||Q245R||Q245R||Q245R|
|8||Thickness of pyrolysis Reactor||16mm||16mm||16mm|
|9||Rotate speed of pyrolysis Reactor||0.4turn/minute||0.4turn/minute||0.4turn/minute|
|11||Mode of cooling||Water cooling||Water cooling||Water cooling|
|12||Cooling area of condenser||100sqm||100sqm||100sqm|
|13||Kind of transmission||Internal gear drive||Internal gear drive||Internal gear drive|
|15||Size of Reactor(D×L)||2200×6000||2200×6600||2600×6600|
|16||Working form||Intermittent operation||Intermittent operation||Intermittent operation|