Used tyre pyrolysis plant product introduction
Used tyre pyrolysis plant
The used tyre pyrolysis plant is mainly used to convert the waste tyre to fuel oil. Pyrolysis is a method that converts the waste tyre to oil for fuel. In the environment without Oxygen, when the temperature elevated the waste plastic will vaporize. When the temperature reached about 350 degrees celsius.the waste tyre will begin crack. The waste tyre will generate oil gas, and then when the temperature of the oil gas cooled down, the oil gas will be liquefied. The liquid is called fuel oil.
The main advantages of the pyrolysis plant are as following:
The picture is about the tyre pyrolysis plant
1. It is a green technology than can convert the waste plastic /tyre to oil; if the waste tyre/plastic dumped they will pollute the environment. Then when the waste plastic or tyre dumped they will pollute the environment and destroy the land. So the plastic to oil technology will solve the problem perfectly. The land filled is avoided and the technology creates economics development.
2. The used tyre pyrolysis plant is very profitable. The raw material of the used tyre pyrolysis plant is waste tyre or waste plastic. In some places the waste tyre or waste plastic are even free. So we can get the waste tyre in a very low price. And the fuel oil will be easily sold. You will make money from the used tyre pyrolysis plant.
3. The used tyre pyrolysis plant is easily promoted and applied in large scale. With more and more companies under construction, we have to deal with more and more rubbish so used tyre pyrolysis plant has a large market, so the pyrolysis plant will be more and more important.
4. The used tyre pyrolysis plant will deal with the waste tyre to oil,solve a great pollution problem used tyre brings,then used tyre pyolysis plant will reduce the pollution to environment,the pyrolysis plant is benefical to the environment and humans' health.
|Technical parameter of used tyre pyrolysis plant|
|2||Raw material||used tyre, waste plastic, waste rubber,|
|3||Structural form||Horizontal rotation||Horizontal rotation||Horizontal rotation|
|4||24-hour Capacity||6 ton||8 ton||10 ton|
|5||Oil yield||2.7-3.3ton||3.6 -4.4ton||4.5 -5.5ton|
|7||Material of pyrolysis Reactor||Q245R||Q245R||Q245R|
|8||Thickness of pyrolysis Reactor||16mm||16mm||16mm|
|9||Rotate speed of pyrolysis Reactor||0.4turn/minute||0.4turn/minute||0.4turn/minute|
|11||Mode of cooling||Water cooling||Water cooling||Water cooling|
|12||Cooling area of condenser||100sqm||100sqm||100sqm|
|13||Kind of transmission||Internal gear drive||Internal gear drive||Internal gear drive|
|15||Size of Reactor(D×L)||2200×6000||2200×6600||2600×6600|
|16||Working form||Intermittent operation||Intermittent operation||Intermittent operation|