Extracting crude oil from waste tyre pyrolysis equipment

Refining news / DATE:2013-11-1

Extracting crude oil from waste tire refining equipment. The work process of extracting crude oil from waste tire with refining equipment can be divided into five steps, which are melting the waste material (waste tires), pyrolysis, cooling, precipitation, split-flow.

We can know clearly through the following aspect:

First, the raw material is put into furnace, then seal the feed inlet system.

Second, burn the fuel material (coal, or wood, or natural gas, oil) in the combustion system. The reactor will slowly heat ,when the temperature reach around 250 degree Celsius, it will produce oil gas .oil gas will be processed by our technology ,then gone to cooling system to cold liquid oil. The gas which can not be liquid under normal pressure, will be designed to back to combustion system to instead the fuel material to burn the reactor. That can save energy very much. After finished oil produce, the temperature of reactor will be down, in same time, carbon black will be discharged automatically.

Third, when the temperature of reactor descends 100 degree Celsius, worker could open the door of reactor to discharge of steel wire. Then can start to another batch working.

Inquiry more extracting crude oil from waste tyre pyrolysis equipment information

Leave a message in the below form to get more information about pyrolysis plant project, our engineer will contact you ASAP to analysis pyrolysis plant project cost for you.

Why we are?

QRcode

    Use Internet explorer 9 or above to reach
    a optimum effect browse.
    Scan QRcode enter into this page directly