Pyrolysis Plant FAQ /Technology

FAQ of pyrolysis plant / DATE:2018-3-7

tyre recycling process

Tyre recycling  process to fuel machine

The tyre recycling process to fuel machine is also called waste plastic to fuel oil pyrolysis plant ,the whole process is safe and envieonmentally friendly .The tyre recycling process to fuel machine can pyrolysis waste tyre to fuel oil ,carbon black and steel wire.

Tyre recycling process to fuel ?

tyre to oil

Tyre recycling prcess to fuel oil working process tyre to fuel oil and carbon black

(1) Put the waste tyres into reactor and make reactor rotate clockwise 0.4-0.8 r/min. Seal the feeding inlet door tightly and make sure there is no gas leakage.

(2) Heat the reactor by using coal, charcoal, fuel gas, wood etc. as heating materials. The reactor will be slowly heated, and when the temperature reach about 250 degrees, the oil gas will be formed.

(3) The oil gas coming out from the reactor then go to condensing system and get liquid oil. The gas which can’t be liquefied under normal pressure will be designed to go back to combustion system through safety device. It can be recycled to heat the reactor as fuel, which will save energy for the whole working process.

(4) After finishing oil production, the temperature of the reactor will cool down. When the temperature falls down to 40 degrees, we can get the carbon black and steel wire.

tyre recycling process

Tyre fuel oil application

The tyre oil can be used as industrial fuel materials for burning, or further refined to diesel or gasoline by waste plastic to diesel plant.



Inquiry more pyrolysis plant technology information

Leave a message to get more information about tyre recycling process to fuel ?.Our engineer will contact you ASAP to analysis pyrolysis plant project cost for you.

Why we are?

QRcode

    Use Internet explorer 9 or above to reach
    a optimum effect browse.
    Scan QRcode enter into this page directly