Pyrolysis Plant FAQ /Technology

FAQ of pyrolysis plant / DATE:2016-4-1

As the highly demand of the oil yield, requirement of better oil standard and convenient working process of waste tire recycling machine, our company started to evolve based on our batch waste tire recycling machine and then invent continuous pyrolysis plant as a new ramification after 5 years technical analyze and research. So far,  our continuous waste tire recycling machine is has already accessed to the international market with incredible feedback.

Both machine have the same working theory but different working process.
Batch waste tire recycling machine:

Batch waste tire recycling machine

Need at least 4 people to operate
People need to put raw material into reactor, then close feeding door.
After burning the fuel material (coal, wood, natural gas or oil) in the furnace. Reactor will be slowly heated. the reactor need to heat 2 hours, then the raw material starts to pyrolysis.
After finishing one turn pyrolysis process, the carbon blank start to discharge.
After cooling the reactor, then people can start the next batch.

Continuous waste tire recycling machine

Continuous waste tire recycling machine

1.Only need two person operate
2.Can keep feeding at least 20t waste plastic in one time pyrolysis process
3. waste tire recycling and carbon black discharge occur at the same time
4.Multiple reactors design for fully pyrolysis to get high oil rate
5.PLC computer control system ensure the safty
6.Indirect heating to prolong the usage life of the reactor

Inquiry more pyrolysis plant technology information

Leave a message to get more information about comparison between batch waste tire recycling machine and continuous waste tire recycling machine.Our engineer will contact you ASAP to analysis pyrolysis plant project cost for you.

Why we are?


    Use Internet explorer 9 or above to reach
    a optimum effect browse.
    Scan QRcode enter into this page directly